-
Email: info@gripseal.com -
Tel: +86 0755-86215125 -
Company Address: 4th Floor, Building 30, Chentian Industrial Zone, Xixiang, Bao'an District, Shenzhen
E10 Electrical connectors are mainly used to solve the long-life fast connection between the modular electrical connector at the tray end and the electrical interface of the customer's product, usually manual connection. According to the usage scenario, it is divided into low-voltage signals,UVWPower line, drive current, etc., usually including aE10Interface, and can be configured or not to configure related wires according to customer needs. GripSealE10Series of test electrical connectors, including signal interface, drive interface,UVWThe power interface, as well as various clips and special-shaped connectors, have different methods from small current to large current and high voltage. The biggest difference from traditional male and female electrical connectors is the insertion and unplugging life, which generally can only withstand50-500The second connection, and affect the electrical performance. AndE10It is a test electrical connector specially designed for high plug-in life, capable of meeting high-frequency long-term use, meeting electrical performance requirements during the life cycle, greatly reducing the failure rate of tray connections, and allowing production to proceed smoothly.E10The series of test electrical connectors are mainly customized, and the bottom layer uses GripSealVerified standard parts and designs to ensure that all products soldE10Series test electrical connectors have excellent electrical properties (including but not limited to rated current, maximum instantaneous current, insulation voltage, high temperature resistance), excellent plug-in and unplug performance, and reasonable price.
For electrical connectors, GripSeal has developed a series of automatic docking male and female connectors, includingC26/C20Series is the most commonly used. Automatic docking male and female heads are made of stainless steel structure to meet50barThe following gas-liquid quick connection is designed without drip. Plugging and unplugging life is our core parameter. Under laboratory conditions, the plugging and unplugging life exceeds1010,000 times. The following specifications are some of our standard specifications. We also provide custom-developed automatic male and female connectors for higher test pressures or larger flow apertures. C26andC20The application scenarios are similar, the main difference is the installation method.C26The threaded fixing method is used, and only one thickness of the fixing plate can be applied, whileC20It is designed for a spring and can be applied to two fixed plates of different thicknesses. The flow aperture is slightly different. Under the same thread,C20The aperture is slightly larger.
For electrical connectors, GripSeal can supply a range of tools and accessories, including pin withdrawal devices and E10X single-core high-voltage cables.
Modular electrical connectors refer to components that contain a C9F male and female frame, one or more different C9X sub-modules, and related pins or jacks. They are divided into C9MP docking module male and C9MS docking module female. Modular electrical connectors provide automatic connection and long-life plugging and unplugging services such as high current, high voltage, and signal electricity, and are the core components of a gas-electro-hydraulic docking system. Most modular electrical connectors are customized according to customer needs. GripSeal also provides a wealth of modular electrical connectors to meet some of the fast selection, delivery, etc., including some UVW high current, drive high current, and some multi-pin signal modules. We will continue to update our modular electrical connector standard docking module product library according to market conditions to meet more and more similar needs, and quickly optimize the performance, delivery, and cost of modular electrical connectors standard docking modules.
After the success of the G series of quick-sealing joints in the market, GripSeal continued to introduce the C series male and female connector product line to the market. The C2X series is mainly aimed at some gas-liquid dual-use scenarios below 50 bar at medium and low pressure, meeting some needs of manual or automatic.
As automotive braking systems continue to evolve towards high performance and lightweight, the air tightness and high pressure test frequency and pressure level of calipers before leaving the factory continue to increase. For high-frequency production lines, the durability of sealed connectors is not only related to the continuity of testing, but also directly affects the overall control of consumables costs. Faced with this increasingly demanding application environment, GripSeal G80LOn the basis of the series, further expand the product boundaries and introduce new materialsG80L......
After the battery pack shell is assembled, the airtightness test is a key process to verify the sealing quality of the whole package. Before the test, all interfaces such as explosion-proof valve, charging port, communication port, coolant import and export on the shell need to be blocked, and then compressed air is filled into the shell through the reserved inflatable port, and the testing equipment monitors the pressure change to determine whether the sealing performance is up to standard. Timely interception of shell sealing defects can effectively prevent defective products from flowing into the next process. According to the shape and tightness of different nozzles......
The water-cooled plate plays a key role in direct heat dissipation in the new energy vehicle battery cooling management system, and its sealing reliability is directly related to the service life of the battery pack and the safety of the vehicle. In the manufacturing process, helium leak detection testing is a key link to verify the integrity of the water-cooled plate seal - during the test, it is necessary to reliably seal the water-cooled plate in and out of the water pipe, which can not only vacuum the interior, but also complete helium charging. The whole process requires extremely strict accuracy and stability of the sealed connection. Practical......
As the new energy vehicle market moves from "high-speed growth" to "high-quality development", vehicle safety, especially the reliability of the "three-power" system (battery, motor, electronic control), has become the core concern of consumers and manufacturers. In the assembly and decommissioning process of the electronic control system, aging testing is the last line of defense to simulate the real working conditions and verify the stability of the system. The improvement of its test efficiency and safety is driving the continuous innovation of production line connection technology.......
In the whole vehicle or parts of the car, various pipelines can be seen everywhere. They are responsible for conducting coolant, oil and other media, and are an integral part of the normal operation of the vehicle. This kind of parts need to be tested for leaks before leaving the factory, but hose workpieces will encounter a unique trouble in leak detection. Low-pressure hoses are easy to deform, and ordinary joints are difficult to clamp. Low-pressure hoses will produce obvious radial deformation during clamping tests. Once the internal pressure is charged, the wall of the tube expands outward, and the ordinary internal expansion type is fast......
Project introduction:Automation integrated equipment vendors have a variety of pipe fittings threads that require quick sealing connections Project requirements:Automatic testing of components is a trend, and a large number of pipe fittings and threads require automatic or manual sealing to improve testing efficiency. Program advantages:G10ProIt is an intelligent quick connector for automatic and fast sealing of straight pipes. It has its own magnetic sensor to feedback whether the quick connector is moving. GripSealIt is a comprehensive quick connector solution provider around you, quickly providing a variety of standard or customized quick connectors.
As automotive braking systems continue to evolve towards high performance and lightweight, the air tightness and high pressure test frequency and pressure level of calipers before leaving the factory continue to increase. For high-frequency production lines, the durability of sealed connectors is not only related to the continuity of testing, but also directly affects the overall control of consumables costs. Faced with this increasingly demanding application environment, GripSeal G80LOn the basis of the series, further expand the product boundaries and introduce new materialsG80L......
After the battery pack shell is assembled, the airtightness test is a key process to verify the sealing quality of the whole package. Before the test, all interfaces such as explosion-proof valve, charging port, communication port, coolant import and export on the shell need to be blocked, and then compressed air is filled into the shell through the reserved inflatable port, and the testing equipment monitors the pressure change to determine whether the sealing performance is up to standard. Timely interception of shell sealing defects can effectively prevent defective products from flowing into the next process. According to the shape and tightness of different nozzles......
The water-cooled plate plays a key role in direct heat dissipation in the new energy vehicle battery cooling management system, and its sealing reliability is directly related to the service life of the battery pack and the safety of the vehicle. In the manufacturing process, helium leak detection testing is a key link to verify the integrity of the water-cooled plate seal - during the test, it is necessary to reliably seal the water-cooled plate in and out of the water pipe, which can not only vacuum the interior, but also complete helium charging. The whole process requires extremely strict accuracy and stability of the sealed connection. Practical......
As the new energy vehicle market moves from "high-speed growth" to "high-quality development", vehicle safety, especially the reliability of the "three-power" system (battery, motor, electronic control), has become the core concern of consumers and manufacturers. In the assembly and decommissioning process of the electronic control system, aging testing is the last line of defense to simulate the real working conditions and verify the stability of the system. The improvement of its test efficiency and safety is driving the continuous innovation of production line connection technology.......
In the whole vehicle or parts of the car, various pipelines can be seen everywhere. They are responsible for conducting coolant, oil and other media, and are an integral part of the normal operation of the vehicle. This kind of parts need to be tested for leaks before leaving the factory, but hose workpieces will encounter a unique trouble in leak detection. Low-pressure hoses are easy to deform, and ordinary joints are difficult to clamp. Low-pressure hoses will produce obvious radial deformation during clamping tests. Once the internal pressure is charged, the wall of the tube expands outward, and the ordinary internal expansion type is fast......
Email: info@gripseal.com Tel: +86 0755-86215125 Company Address: 4th Floor, Building 30, Chentian Industrial Zone, Xixiang, Bao'an District, Shenzhen 
